Free 2V0-41.24: VMware NSX 4.X Professional V2 Exam Questions and Answers
74 verified practice questions for 2V0-41.24.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 19, 2026
- Exam code
- 2V0-41.24
- Provider
- VMware
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Which tool could be used to configure BGP on a Tier-0 Gateway?
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, C
BGP on a Tier-0 gateway is configured through the NSX Manager API or the NSX CLI on the Edge node; ESX CLI and iPerf3 cannot configure routing.
Was this answer correct?Question #2
An NSX administrator would like to create an L2 segment with the following requirements: • L2 domain should not exist on the physical switches. • East/West communication must be maximized as much as possible. Which type of segment must the administrator choose?
Please select an optionIncorrectCorrect answer: B
An overlay segment is a layer 2 broadcast domain that is implemented as a logical construct in the NSX-T Data Center software. Overlay segments do not require any configuration on the physical switches, and they allow for optimal east/west communication between workloads on different ESXi hosts. Overlay segments use the Geneve protocol to encapsulate and decapsulate traffic between the hosts. Overlay segments are created and managed by the NSX Manager. https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID- 316E5027-E588-455C-88AD-A7DA930A4F0B.html
Was this answer correct?Question #3
What are two functions of the Service Engines in NSX Advanced Load Balancer? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, C
Reference: https://docs.vmware.com/en/VMware-NSX-Advanced-Load- Balancer/22.1/Administration_Guide/GUID-84139C37-0129-40A7-A7AB- 5A93E1F65B6D.html
Was this answer correct?Question #4
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager?
Please select an optionIncorrectCorrect answer: D
Setting the cli-timeout value to 0 disables the CLI timeout on NSX Manager, preventing the nsxcli session from timing out due to inactivity. This ensures that the session remains active indefinitely until manually closed.
Was this answer correct?Question #5
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: C, D
The esxcli network ip interface ipv4 get command is used to display the IP address configuration of the VMkernel network interfaces, including those used for the Geneve protocol. The esxcfg-vmknic -l command lists all VMkernel network interfaces, including their IP addresses, which can help identify the VMkernel port for the Geneve protocol.
Was this answer correct?Question #6
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
Please select an optionIncorrectCorrect answer: D
Switch Visualization in the NSX UI provides a clear mapping between virtual NICs (vNICs) and the physical adapters on the host. This feature allows administrators to see how virtual network interfaces connect to the underlying physical network infrastructure, which is essential for troubleshooting connectivity issues on transport nodes.
Was this answer correct?Question #7
Which VPN type must be configured before enabling an L2VPN?
Please select an optionIncorrectCorrect answer: D
Before enabling an L2VPN (Layer 2 VPN) in NSX, a Route-based IPSec VPN must be configured. Route-based VPNs create a secure tunnel over which Layer 2 traffic can be extended, allowing for the creation of L2VPN connections. This setup is required to establish the underlying secure connectivity that L2VPN relies on for traffic between sites.
Was this answer correct?Question #8
What should an NSX administrator check to verify that VMware Identity Manager integration is successful?
Please select an optionIncorrectCorrect answer: A
To verify that VMware Identity Manager integration is successful with NSX, the administrator should check the NSX UI for the integration status. If it is configured correctly, the status should be marked as "Enabled," indicating that the integration is active and functioning.
Was this answer correct?Question #9
Which three selections are capabilities of Network Topology? (Choose three.)
Select 3 answers.
Please select an optionIncorrectCorrect answer: A, B, C
Display how the different NSX components are interconnected. Network Topology in NSX provides a visual representation of how different NSX components (like Edge nodes, Logical Routers, and other NSX components) are interconnected. Display the VMs connected to Segments. It also allows you to see which VMs are connected to specific segments (logical switches). Display how the Physical components are interconnected. The Network Topology view includes information about how physical network components are connected, providing a comprehensive overview of both the virtual and physical networking infrastructure.
Was this answer correct?Question #10
In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers. Which two actions could address low throughput and congestion? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, C
Configure ECMP on the Tier-0 gateway: ECMP (Equal-Cost Multi-Path) allows multiple paths for traffic between the Tier-0 Gateway and the upstream physical routers, effectively distributing the traffic load and improving throughput. By enabling ECMP, you can reduce congestion and increase bandwidth utilization, thus addressing performance issues. Deploy Large size Edge node/s: Deploying larger Edge nodes can provide more resources (CPU, memory, and network interfaces) to handle higher throughput and reduce congestion. This is especially important if the existing Edge node is overwhelmed by the amount of traffic.
Was this answer correct?
Continue with 2V0-41.24: VMware NSX 4.X Professional V2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.24: VMware NSX 4.X Professional V2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other VMware certifications
- 2V0-21.20: Professional VMware vSphere 7.x (opens in a new tab)
- 2V0-33.22: VMware Cloud Professional (opens in a new tab)
- 2V0-21.23: VMware vSphere 8.x Professional (opens in a new tab)
- 3V0-21.21: Advanced Design VMware vSphere 7.x (opens in a new tab)
- 2V0-41.23: VMware NSX 4.x Professional (opens in a new tab)
- 2V0-41.20: Professional VMware NSX-T Data Center (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://www.vmware.com/learning/certification.html
- Q1: What are VMware Certification Exams?
- A: VMware Certification Exams validate your expertise in using and managing VMware’s virtualization and cloud computing solutions. These certifications demonstrate your proficiency in deploying, configuring, and optimizing VMware technologies to enhance IT infrastructure and support business operations.
- Q2: Why should I pursue VMware Certification?
- A: VMware Certification enhances your professional credibility, showcasing your skills and knowledge in virtualization and cloud computing. This can lead to better job opportunities, higher salaries, and career advancement in IT infrastructure, cloud computing, and network administration roles.
- Q3: What are the benefits of VMware Certification?
- A: Benefits include recognition as a certified VMware professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest VMware technologies and best practices.
- Q4: Who should take VMware Certification Exams?
- A: IT professionals, system administrators, network engineers, cloud architects, and anyone involved in managing and implementing VMware solutions should consider these certifications to validate their expertise and advance their careers.
- Q5: What types of VMware Certification Exams are available?
- A: VMware offers various certification paths, including:
- Q6: How do I prepare for VMware Certification Exams?
- A: Preparation can include official VMware training courses, study guides, practice exams, online tutorials, and hands-on experience with VMware products and solutions.
- Q7: Where can I take VMware Certification Exams?
- A: VMware Certification Exams can be taken online with remote proctoring or at authorized Pearson VUE testing centers worldwide, providing flexibility to fit your schedule and location.
- Q8: How do VMware Certifications impact my career?
- A: VMware Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in IT infrastructure, cloud computing, and network administration.
- Q9: Are there any prerequisites for VMware Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior experience with VMware products. Check the specific requirements for each certification path on the VMware certification website.
- Q10: How often do I need to recertify for VMware Certifications?
- A: VMware Certifications typically require recertification every two years to ensure that certified professionals stay updated with the latest technologies and industry practices. This can be done through continuing education or by passing the latest version of the certification exam.