Free 2V0-41.23: VMware NSX 4.x Professional Exam Questions and Answers
VMware NSX 4.x Professional is exam 2V0-41.23, part of VMware certification, now run within the Broadcom Certification Program. VMware codes put the tier in the leading digit — 1V0 is Technical Associate, 2V0 Professional, 3V0 Advanced Professional, and 5V0 or 6V0 specialist — followed by the technology track and then the product version, so 2V0-21.23 is the professional vSphere exam for the 8.x release.
If you searched for 2V0-41.23 dumps, a 2V0-41.23 ExamTopics discussion or a free 2V0-41.23 PDF, this is the 2V0-41.23: VMware NSX 4.x Professional question bank: practice questions with verified answers and explanations, a timed 2V0-41.23 practice test and updates whenever VMware changes the exam.
Last updated: October 6, 2026
- Exam code
- 2V0-41.23
- Provider
- VMware
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Official page
- Official Exam website
- Our test mode duration & pass mark
- 130 mins · 70%
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Which two of the following will be used for Ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)
Select 2 answers.
Correct answer: B, C
Explanation
The two interfaces that will be used for ingress traffic on the Edge node supporting a Single Tier topology are: B. Tier-0 Uplink interface C. Downlink Interface for the Tier-0 DR The Tier-0 Uplink interface is the interface that connects the Tier-0 gateway to the external network. It is used to receive traffic from the physical router or switch that is the next hop for the Tier-0 gateway. The Tier-0 Uplink interface can be configured with a static IP address or use BGP to exchange routes with the external network. The Downlink Interface for the Tier-0 DR is the interface that connects the Tier-0 gateway to the workload segments. It is used to receive traffic from the VMs or containers that are attached to the segments. The Downlink Interface for the Tier-0 DR is a logical interface (LIF) that is distributed across all transport nodes that host the segments. The Downlink Interface for the Tier-0 DR has an IP address that acts as the default gateway for the VMs or containers on the segments.
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #2
Which field in a Tier-1 Gateway Firewall would be used to allow access for a collection of trustworthy web sites?
Correct answer: B
Explanation
The field in a Tier-1 Gateway Firewall that would be used to allow access for a collection of trustworthy web sites is Profiles -> L7 Access Profile. This field allows the user to create a Layer 7 access profile that defines list of allowed or blocked URLs based on categories, reputation, or custom entries1. The user can then apply the L7 access profile to a firewall rule to control the traffic based on the URL filtering criteria1. The other options are incorrect because they are not related to URL filtering. The Source field specifies the source IP address or group of the firewall rule1. The Destination field specifies the destination IP address or group of the firewall rule1. The Profiles -> Context Profiles field allows the user to create a context profile that defines a list of application signatures or attributes that can be used to identify and classify network traffic1. References: Gateway Firewall
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #3
Which table on an ESXi host is used to determine the location of a particular workload for a frame-forwarding decision?
Correct answer: B
Explanation
The MAC table on an ESXi host is used to determine the location of a particular workload for a frame-forwarding decision. The MAC table maps the MAC addresses of the workloads to their corresponding tunnel endpoint (TEP) IP addresses. The TEP IP address identifies the ESXi host where the workload resides. The MAC table is populated by learning the source MAC addresses of the incoming frames from the workloads. The MAC table is also synchronized with other ESXi hosts in the same transport zone by using the NSX Controller. https://nsx.techzone.vmware.com/resource/nsx-reference-design-guide
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #4
Where does an administrator configure the VLANs used In VRF Lite? (Choose two.)
Select 2 answers.
Correct answer: B, D
Explanation
According to the VMware NSX Documentation, these are the two places where you need to configure the VLANs used in VRF Lite: Uplink trunk segment: This is a segment that connects a tier-0 gateway to a physical network using multiple VLAN tags. You need to configure the VLAN IDs for each VRF on this segment. Uplink interface of the VRF gateway: This is an interface that connects a VRF gateway to an uplink trunk segment using a specific VLAN tag. You need to configure the VLAN ID for each VRF on this interface.
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #5
An NSX administrator Is treating a NAT rule on a Tler-0 Gateway configured In active-standby high availability mode. Which two NAT rule types are supported for this configuration? (Choose two.)
Select 2 answers.
Correct answer: B, E
Explanation
According to the VMware NSX Documentation, these are two NAT rule types that are supported for a tier-0 gateway configured in active-standby high availability mode. NAT stands for Network Address Translation and is a feature that allows you to modify the source or destination IP address of a packet as it passes through a gateway. Destination NAT: This rule type allows you to change the destination IP address of a packet from an external IP address to an internal IP address. You can use this rule type to provide access to your internal servers from external networks using public IP addresses. Source NAT: This rule type allows you to change the source IP address of a packet from an internal IP address to an external IP address. You can use this rule type to provide access to external networks from your internal servers using public IP addresses.
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #6
Which three of the following describe the Border Gateway Routing Protocol (BGP) configuration on a Tier-0 Gateway? (Choose three.)
Select 3 answers.
Correct answer: A, B, D
Explanation
* A. Can be used as an Exterior Gateway Protocol. This is correct. BGP is a protocol that can be used to exchange routing information between different autonomous systems (AS). An AS is a network or a group of networks under a single administrative control. BGP can be used as an Exterior Gateway Protocol (EGP) to connect an AS to other ASes on the internet or other external networks1 * B. It supports a 4-byte autonomous system number. This is correct. BGP supports both 2-byte and 4-byte AS numbers. A 2-byte AS number can range from 1 to 65535, while a 4-byte AS number can range from 65536 to 4294967295. NSX supports both 2-byte and 4-byte AS numbers for BGP configuration on a Tier-0 Gateway2 * C. The network is divided into areas that are logical groups. This is incorrect. This statement describes OSPF, not BGP. OSPF is another routing protocol that operates within a single AS and divides the network into areas to reduce routing overhead and improve scalability. BGP does not use the concept of areas, but rather uses attributes, policies, and filters to control the routing decisions and traffic flow3 * D. FIGRP Is disabled by default. This is correct. FIGRP stands for Fast Interior Gateway Routing Protocol, which is an enhanced version of IGRP, an obsolete routing protocol developed by Cisco. FIGRP is not supported by NSX and is disabled by default on a Tier-0 Gateway. * E. BGP is enabled by default. This is incorrect. BGP is not enabled by default on a Tier-0 Gateway. To enable BGP, you need to configure the local AS number and the BGP neighbors on the Tier-0 Gateway using the NSX Manager UI or API. To learn more about BGP configuration on a Tier-0 Gateway in NSX, you can refer to the following resources: VMware NSX Documentation: Configure BGP 1 VMware NSX 4.x Professional: BGP Configuration VMware NSX 4.x Professional: BGP Troubleshooting
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #7
When a stateful service is enabled for the first lime on a Tier-0 Gateway, what happens on the NSX Edge node'
Correct answer: A
Explanation
The answer is A. SR is instantiated and automatically connected with DR. SR stands for Service Router and DR stands for Distributed Router. They are components of the NSX Edge node that provide different functions1 The SR is responsible for providing stateful services such as NAT, firewall, load balancing, VPN, and DHCP. The DR is responsible for providing distributed routing and switching between logical segments and the physical network1 When a stateful service is enabled for the first time on a Tier-0 Gateway, the NSX Edge node automatically creates an SR instance and connects it with the existing DR instance. This allows the stateful service to be applied to the traffic that passes through the SR before reaching the DR2 According to the VMware NSX 4.x Professional Exam Guide, understanding the SR and DR components and their functions is one of the exam objectives3 To learn more about the SR and DR components and how they work on the NSX Edge node, you can refer to the following resources: VMware NSX Documentation: NSX Edge Components 1 VMware NSX 4.x Professional: NSX Edge Architecture VMware NSX 4.x Professional: NSX Edge Routing
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #8
NSX improves the security of today's modern workloads by preventing lateral movement, which feature of NSX can be used to achieve this?
Correct answer: A
Explanation
According to the web search results, network segmentation is a feature of NSX that improves the security of today’s modern workloads by preventing lateral movement. Lateral movement is a technique used by attackers to move from one compromised system to another within a network, exploiting vulnerabilities or credentials . Network segmentation prevents lateral movement by dividing a network into smaller segments or zones, each with its own security policies and controls. This way, if one segment is compromised, the attacker cannot access other segments or resources . NSX enables network segmentation by using micro- segmentation, which applies granular firewall rules at the virtual machine level, regardless of the physical network topology .
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #9
Which CLI command shows syslog on NSX Manager?
Correct answer: D
Explanation
According to the VMware NSX CLI Reference Guide, this CLI command shows the syslog messages on the NSX Manager node. You can use this command to view the system logs for troubleshooting or monitoring purposes. The other options are either incorrect or not available for this task. get log-file auth.log is a CLI command that shows the authentication logs on the NSX Manager node, not the syslog messages. /var/log/syslog/syslog.log is not a CLI command, but a file path that may contain syslog messages on some Linux systems, but not on the NSX Manager node. show log manager follow is not a valid CLI command, as there is no show log command or manager option in the NSX CLI. ## NSX Cli command get log-file <fiilename> get log-file <filename> follow # Below are commonly used log files, there are many more log files get log-file <auth.log | controller | controller-error | http.log | kern.log | manager.log | node-mgmt.log | policy.log | syslog> [follow] # use [follow] to continuing monitor Example: get log-file syslog follow get log-file syslog
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #10
Which Is the only supported mode In NSX Global Manager when using Federation?
Correct answer: B
Explanation
NSX Global Manager is a feature of NSX that allows managing multiple NSX domains across different sites or clouds from a single pane of glass. NSX Global Manager supports Federation, which is a capability that enables synchronizing configuration and policy across multiple NSX domains. Federation has many benefits such as simplifying operations, improving resiliency, and enabling disaster recovery. The only supported mode in NSX Global Manager when using Federation is Policy mode. Policy mode means that NSX Global Manager acts as a policy manager that defines and distributes global policies to local NSX managers in different domains. Policy mode also allows local NSX managers to have their own local policies that can override or merge with global policies.
Continue with 2V0-41.23: VMware NSX 4.x Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 2V0-41.23: VMware NSX 4.x Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Discussion
Explain your reasoning, not just the letterOther VMware certifications
- 2V0-21.20: Professional VMware vSphere 7.x (opens in a new tab)
- 2V0-33.22: VMware Cloud Professional (opens in a new tab)
- 3V0-21.21: Advanced Design VMware vSphere 7.x (opens in a new tab)
- 2V0-21.23: VMware vSphere 8.x Professional (opens in a new tab)
- 2V0-41.20: Professional VMware NSX-T Data Center (opens in a new tab)
- 5V0-22.23: VMware vSAN Specialist v2 (opens in a new tab)
- 2V0-622D: VMware Certified Professional 6.5 - Data Center Virtualization Delta (opens in a new tab)
- 2V0-51.19: VMware Professional Horizon 7.7 Exam 2019 (opens in a new tab)
- 1V0-21.20: Associate VMware Data Center Virtualization (opens in a new tab)
- 2V0-31.19: Professional VMware vRealize Automation 7.6 (opens in a new tab)
- 2V0-81.20: Professional VMware Security (opens in a new tab)
- 2V0-51.21: Professional VMware Horizon 8.x (opens in a new tab)
Reviews
Write a review★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit SharmaVerified buyer
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar NyströmVerified buyer
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah SmithVerified buyer
FAQ
Learn More: https://www.vmware.com/learning/certification.html
- Q1: What is the 2V0-41.23: VMware NSX 4.x Professional exam?
- A: 2V0-41.23: VMware NSX 4.x Professional is a VMware certification exam. Judging by the questions in our bank, it concentrates on node, transport, tler-0, gateway and introspection.
- Q2: What topics does the 2V0-41.23: VMware NSX 4.x Professional exam cover?
- A: Questions in our 2V0-41.23: VMware NSX 4.x Professional bank cluster around node, transport, tler-0, gateway, introspection, edge, esxi and vmware. Working through the full set is the quickest way to find which of these you are weakest on.
- Q3: How should I prepare for 2V0-41.23: VMware NSX 4.x Professional?
- A: Work through the 2V0-41.23: VMware NSX 4.x Professional practice questions here, checking your answer on each one, then sit the practice test to rehearse the exam under timed conditions before the real thing.
- Q4: Are these real 2V0-41.23: VMware NSX 4.x Professional exam questions?
- A: They are drawn from officially released past questions and from community members who have sat 2V0-41.23: VMware NSX 4.x Professional. Answers are verified and updated weekly.
- Q5: Where do I register for the 2V0-41.23: VMware NSX 4.x Professional exam?
- A: Register through VMware directly at https://www.vmware.com/learning/certification.html. Exampractice is not affiliated with VMware and does not administer the exam.
- Q6: Is there a free 2V0-41.23: VMware NSX 4.x Professional sample?
- A: Yes. Every 2V0-41.23: VMware NSX 4.x Professional page shows a free sample of real questions. Upgrading opens the full bank and the practice test.
- Q7: What are VMware Certification Exams?
- A: VMware Certification Exams validate your expertise in using and managing VMware’s virtualization and cloud computing solutions. These certifications demonstrate your proficiency in deploying, configuring, and optimizing VMware technologies to enhance IT infrastructure and support business operations.
- Q8: Why should I pursue VMware Certification?
- A: VMware Certification enhances your professional credibility, showcasing your skills and knowledge in virtualization and cloud computing. This can lead to better job opportunities, higher salaries, and career advancement in IT infrastructure, cloud computing, and network administration roles.
- Q9: What are the benefits of VMware Certification?
- A: Benefits include recognition as a certified VMware professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest VMware technologies and best practices.
- Q10: Who should take VMware Certification Exams?
- A: IT professionals, system administrators, network engineers, cloud architects, and anyone involved in managing and implementing VMware solutions should consider these certifications to validate their expertise and advance their careers.
- Q11: What types of VMware Certification Exams are available?
- A: VMware offers various certification paths, including:
- Q12: How do I prepare for VMware Certification Exams?
- A: Preparation can include official VMware training courses, study guides, practice exams, online tutorials, and hands-on experience with VMware products and solutions.
- Q13: Where can I take VMware Certification Exams?
- A: VMware Certification Exams can be taken online with remote proctoring or at authorized Pearson VUE testing centers worldwide, providing flexibility to fit your schedule and location.
- Q14: How do VMware Certifications impact my career?
- A: VMware Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in IT infrastructure, cloud computing, and network administration.
- Q15: Are there any prerequisites for VMware Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior experience with VMware products. Check the specific requirements for each certification path on the VMware certification website.
- Q16: How often do I need to recertify for VMware Certifications?
- A: VMware Certifications typically require recertification every two years to ensure that certified professionals stay updated with the latest technologies and industry practices. This can be done through continuing education or by passing the latest version of the certification exam.