Free HPE0-S60: Delta - HPE Compute Solutions Exam Questions and Answers
60 verified practice questions for HPE0-S60.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 19, 2026
- Exam code
- HPE0-S60
- Provider
- HP
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric. The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
Please select an optionIncorrectCorrect answer: A
The D3940 must first be imported into HPE OneView in a managed state before drives can be presented; unmanaged or unclaimed storage modules make drives invisible to the compute nodes. iSCSI networks are irrelevant to SAS-attached storage.
Was this answer correct?Question #2
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
Please select an optionIncorrectCorrect answer: B
Apollo 2000 Gen10 Plus uses single-socket XL220n/XL225n server trays, with up to four trays in one 2U chassis. Persistent memory is optional, not standard.
Was this answer correct?Question #3
Your customer has the following HPE Synergy setup - 3 HPE Synergy 12000 Frames - 4 HPE Virtual Connect SE 100 Gb F32 Modules - 2 HPE Synergy 50 GO Interconnect Link Modules - 36 HPE Synergy 480 Gen10 Plus compute modules - 2 HPE Composer 2 modules Which statement about this setup is true?
Please select an optionIncorrectCorrect answer: C
Synergy compute modules are licensed individually, so 36 compute nodes need 36 HPE OneView Advanced licenses. Three frames form one logical enclosure managed by the two Composers, and every device bay is filled by compute modules, leaving no room for a D3940.
Was this answer correct?Question #4
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system. What is required from the VMware side to enable LAG?
Please select an optionIncorrectCorrect answer: A
ESXi LACP link aggregation groups are only supported on a vSphere Distributed Switch, so the profile LAG must map to a distributed switch.
Was this answer correct?Question #5
Which statement about an HPE Oneview support dump is true?
Please select an optionIncorrectCorrect answer: B
A support dump is an encrypted binary archive intended for HPE support tooling, not a readable text file. Logical enclosure dumps are created separately rather than being included by default.
Was this answer correct?Question #6
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric. Which statement regarding this setup is true?
Please select an optionIncorrectCorrect answer: C
Was this answer correct?Question #7
Refer to the exhibit. Which statement about this logical interconnect group is true?
Please select an optionIncorrectCorrect answer: D
Was this answer correct?Question #8
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
Please select an optionIncorrectCorrect answer: D
Storm control rate-limits excessive inbound broadcast, multicast and destination-lookup-failure traffic on Virtual Connect ports. Loop protection and pause flood protection address loops and pause frames instead.
Was this answer correct?Question #9
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession. Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
Please select an optionIncorrectCorrect answer: D
Port flap protection detects links that bounce repeatedly and disables those ports to stop the disturbance; storm control and pause flood protection address traffic, not link flapping.
Was this answer correct?Question #10
Click the area within the iLO management interface that will allow you to access workload Advisor.
Type your answer, then reveal.
Please select an optionIncorrectCorrect answer: Administration
Continue with HPE0-S60: Delta - HPE Compute Solutions
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in HPE0-S60: Delta - HPE Compute Solutions, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other HP certifications
- HPE0-V14: Building HPE Hybrid IT Solutions (opens in a new tab)
- HPE0-J68: HPE Storage Solutions (opens in a new tab)
- HPE6-A45: Implementing Aruba Campus Switching solutions (opens in a new tab)
- HPE0-S57: Designing HPE Hybrid IT Solutions (opens in a new tab)
- HPE6-A70: Aruba Certified Mobility Associate Exam (opens in a new tab)
- HPE6-A73: Aruba Certified Switching Professional (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://certification-learning.hpe.com/tr/certifications
- Q1: What are HP Certification Exams?
- A: HP (Hewlett-Packard) Certification Exams validate your expertise in using and managing HP’s hardware, software, and solutions, including servers, storage, networking, and printing technologies. These certifications demonstrate your proficiency in deploying, configuring, and optimizing HP products to support enterprise IT infrastructure.
- Q2: Why should I pursue HP Certification?
- A: HP Certification enhances your professional credibility, showcasing your skills and knowledge in HP technologies. This can lead to better job opportunities, higher salaries, and career advancement in IT, networking, and infrastructure management roles.
- Q3: What are the benefits of HP Certification?
- A: Benefits include recognition as a certified HP professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest HP technologies and best practices.
- Q4: Who should take HP Certification Exams?
- A: IT professionals, system administrators, network engineers, and anyone involved in managing and implementing HP solutions should consider these certifications to validate their expertise and advance their careers.
- Q5: What types of HP Certification Exams are available?
- A: HP offers various certification paths, including:
- Q6: How do I prepare for HP Certification Exams?
- A: Preparation can include official HP training courses, study guides, practice exams, online tutorials, and hands-on experience with HP products and solutions.
- Q7: Where can I take HP Certification Exams?
- A: HP Certification Exams can be taken at authorized Pearson VUE testing centers worldwide, providing flexibility to fit your schedule and location.
- Q8: How do HP Certifications impact my career?
- A: HP Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in IT and infrastructure management.
- Q9: Are there any prerequisites for HP Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior experience with HP products. Check the specific requirements for each certification path on the HP certification website.
- Q10: How often do I need to recertify for HP Certifications?
- A: HP Certifications typically require recertification every three years to ensure that certified professionals stay updated with the latest technologies and industry practices.