Free HPE6-A73: Aruba Certified Switching Professional Exam Questions and Answers
Aruba Certified Switching Professional is exam HPE6-A73, part of HPE Certification and Learning from Hewlett Packard Enterprise. HPE exam codes carry the delivery method in the digit and the technology in the letter that follows: HPE0 exams are proctored and written, HPE2 are web-based, HPE6 cover Aruba networking and HPE7 are comprehensive exams, while S is compute, J is storage, V is virtualisation and cloud, G is GreenLake and A is Aruba. Question counts, durations and pass marks are set per exam and printed on each datasheet rather than shared across the programme.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 20, 2026
- Exam code
- HPE6-A73
- Provider
- HP
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Official page
- Official Exam website
- Our test mode duration & pass mark
- 130 mins · 70%
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches. What would cause this problem?
Please select an optionIncorrectCorrect answer: C
VSX LAG member interfaces must be layer-2 links, so leaving them in layer-3 mode prevents the multi-chassis LAG from coming up with the remote switch.
Was this answer correct?Question #2
What must a network administrator implement in order to run an NAE script on an AOS-CX switch?
Please select an optionIncorrectCorrect answer: D
An NAE script only runs once it is instantiated as an agent on the switch; the agent is the running instance that monitors and applies the script logic.
Was this answer correct?Question #3
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
Please select an optionIncorrectCorrect answer: A
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.
Was this answer correct?Question #4
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit. How should the administrator purchase and/or install the NetEdit solution?
Please select an optionIncorrectCorrect answer: C
NetEdit is distributed as an Aruba-supplied OVA and is deployed as a virtual machine; it is not sold as hardware or as a Linux package installation.
Was this answer correct?Question #5
What is a concept associated with PIM sparse mode (SM)?
Please select an optionIncorrectCorrect answer: B
PIM sparse mode is an explicit-join protocol: receivers' designated routers must send periodic PIM join messages toward the RP or source to keep the shared tree and shortest path tree alive, otherwise state times out.
Was this answer correct?Question #6
When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?
Please select an optionIncorrectCorrect answer: D
Validation processes + Syntax validation – When: while typing – What: command syntax including in-line help + Semantics validation – When: VALIDATE button (in multi-editor) or before DEPLOY – What: configuration consistency + Conformance validation – When: while editing – What: compliance with conformance rules: corporate policies, minimum connectivity requirements, etc. + Change validation – When: during DEPLOY (before and after configuration deployment) – What: compares device state before and after changes are applied (using show commands)
Was this answer correct?Question #7
An administrator implements interim accounting for guest users so that ClearPass can track the amount of bandwidth that guests upload and download. Guests that abuse bandwidth consumption should be disconnected from the network. The administrator configures the following on the AOS-CX access switches: After performing this configuration, the administrator notices that guest users that have exceeded the guest bandwidth limit are not being disconnected. Upon further investigation, Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch. What is causing this issue?
Please select an optionIncorrectCorrect answer: A
ClearPass is sending the disconnect CoA, so the failure is at the switch: RADIUS dynamic authorization (CoA) must be enabled before the switch will accept and act on the message.
Was this answer correct?Question #8
What is correct regarding the configuration of ACLs on AOS-CX switches?
Please select an optionIncorrectCorrect answer: C
AOS-CX ACLs use wildcard masks so a single entry can match a range of IP addresses. Numbered ranges and prefix-list style route matching are not how AOS-CX ACLs are defined.
Was this answer correct?Question #9
When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?
Please select an optionIncorrectCorrect answer: D
When pasting configuration into NetEdit, a leading Tab indents the line so the command is entered inside the context of the preceding command rather than at the top level.
Was this answer correct?Question #10
How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?
Please select an optionIncorrectCorrect answer: B
NAE scripts are uploaded and their agents created from the AOS-CX switch's own web interface, where the resulting monitoring graphs are also displayed.
Was this answer correct?
Continue with HPE6-A73: Aruba Certified Switching Professional
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in HPE6-A73: Aruba Certified Switching Professional, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other HP certifications
- HPE0-V14: Building HPE Hybrid IT Solutions (opens in a new tab)
- HPE0-J68: HPE Storage Solutions (opens in a new tab)
- HPE6-A45: Implementing Aruba Campus Switching solutions (opens in a new tab)
- HPE0-S57: Designing HPE Hybrid IT Solutions (opens in a new tab)
- HPE6-A70: Aruba Certified Mobility Associate Exam (opens in a new tab)
- HPE2-T36: Using HPE OneView (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://certification-learning.hpe.com/tr/certifications
- Q1: What is the HPE6-A73: Aruba Certified Switching Professional exam?
- A: HPE6-A73: Aruba Certified Switching Professional is a HP certification exam. Judging by the questions in our bank, it concentrates on aos-cx, switches, aruba, switch and netedit.
- Q2: What topics does the HPE6-A73: Aruba Certified Switching Professional exam cover?
- A: Questions in our HPE6-A73: Aruba Certified Switching Professional bank cluster around aos-cx, switches, aruba, switch, netedit, campus, uplink and vlan. Working through the full set is the quickest way to find which of these you are weakest on.
- Q3: How should I prepare for HPE6-A73: Aruba Certified Switching Professional?
- A: Work through the HPE6-A73: Aruba Certified Switching Professional practice questions here, checking your answer on each one, then sit the practice test to rehearse the exam under timed conditions before the real thing.
- Q4: Are these real HPE6-A73: Aruba Certified Switching Professional exam questions?
- A: They are drawn from officially released past questions and from community members who have sat HPE6-A73: Aruba Certified Switching Professional. Answers are verified and updated weekly.
- Q5: Where do I register for the HPE6-A73: Aruba Certified Switching Professional exam?
- A: Register through HP directly at https://certification-learning.hpe.com/tr/certifications. Exampractice is not affiliated with HP and does not administer the exam.
- Q6: Is there a free HPE6-A73: Aruba Certified Switching Professional sample?
- A: Yes. Every HPE6-A73: Aruba Certified Switching Professional page shows a free sample of real questions. Upgrading opens the full bank and the practice test.
- Q7: What are HP Certification Exams?
- A: HP (Hewlett-Packard) Certification Exams validate your expertise in using and managing HP’s hardware, software, and solutions, including servers, storage, networking, and printing technologies. These certifications demonstrate your proficiency in deploying, configuring, and optimizing HP products to support enterprise IT infrastructure.
- Q8: Why should I pursue HP Certification?
- A: HP Certification enhances your professional credibility, showcasing your skills and knowledge in HP technologies. This can lead to better job opportunities, higher salaries, and career advancement in IT, networking, and infrastructure management roles.
- Q9: What are the benefits of HP Certification?
- A: Benefits include recognition as a certified HP professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest HP technologies and best practices.
- Q10: Who should take HP Certification Exams?
- A: IT professionals, system administrators, network engineers, and anyone involved in managing and implementing HP solutions should consider these certifications to validate their expertise and advance their careers.
- Q11: What types of HP Certification Exams are available?
- A: HP offers various certification paths, including:
- Q12: How do I prepare for HP Certification Exams?
- A: Preparation can include official HP training courses, study guides, practice exams, online tutorials, and hands-on experience with HP products and solutions.
- Q13: Where can I take HP Certification Exams?
- A: HP Certification Exams can be taken at authorized Pearson VUE testing centers worldwide, providing flexibility to fit your schedule and location.
- Q14: How do HP Certifications impact my career?
- A: HP Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in IT and infrastructure management.
- Q15: Are there any prerequisites for HP Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior experience with HP products. Check the specific requirements for each certification path on the HP certification website.
- Q16: How often do I need to recertify for HP Certifications?
- A: HP Certifications typically require recertification every three years to ensure that certified professionals stay updated with the latest technologies and industry practices.