Free NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Exam Questions and Answers
Fortinet NSE 6 - FortiSwitch 7.2 is part of the Fortinet NSE certification programme. Fortinet's scheme runs NSE 1 to NSE 8, with NSE 4 the pivotal FortiGate administrator credential and NSE 5 to 7 split across four tracks — secure networking, security operations, SASE and cloud security. Exam codes encode the level, the product and the FortiOS version, so NSE4_FGT_AD-7.6 is NSE 4, FortiGate, administrator, on 7.6.
If you searched for NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 dumps, an ExamTopics discussion or a free PDF, this is the question bank for it: practice questions with verified answers and explanations, a timed practice test and updates whenever Fortinet changes the exam.
Last updated: October 31, 2026
- Provider
- Fortinet
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
- Practice format
- Multiple choice
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
A new FortiSwitch is connected to the FortiLink interface of FortiGate-1. It appears in the managed FortiSwitch list with a status of Discovered, and it has not been authorized. The administrator opens the entry for the switch under config switch-controller managed-switch in the CLI. Which command authorizes the switch?
Correct answer: C
Explanation
Authorization is done by setting fsw-wan1-admin to enable on the managed-switch entry. The value discovered is the unauthorized state the switch is already in. The fsw-wan1-peer setting only names the FortiGate interface used for the connection, and directly-connected describes topology, not authorization.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #2
Refer to the exhibit. FSW-A: config system interface edit "vlan20" set ip 192.168.20.2 255.255.255.0 set allowaccess ping next end config router ospf set router-id 1.1.1.1 config area edit 0.0.0.0 next end config network edit 1 set prefix 192.168.2.0 255.255.255.0 next end end FSW-B: config system interface edit "vlan20" set ip 192.168.20.3 255.255.255.0 next end config router ospf set router-id 2.2.2.2 config area edit 0.0.0.0 next end config network edit 1 set prefix 192.168.20.0 255.255.255.0 next end end FSW-A and FSW-B are connected through VLAN 20 SVIs. FSW-A does not form an OSPF adjacency with FSW-B. Why?
Correct answer: C
Explanation
OSPF runs only on interfaces whose IP address falls within a configured network statement. The prefix 192.168.2.0/24 on FSW-A does not include 192.168.20.2, so vlan20 never sends hellos. The router ID is only an identifier and does not need to match any subnet, and allowaccess controls management services, not routing protocols.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #3
FortiGate-1 detects an indicator of compromise on a host that connects to an access port of a managed FortiSwitch. The administrator wants the host automatically quarantined at the switch port when this event occurs. Which automation stitch action should the administrator configure?
Correct answer: A
Explanation
The Access Layer Quarantine action places the offending device in quarantine on the FortiSwitch or FortiAP it is attached to. The EMS action depends on FortiClient on the endpoint, and Ban IP blocks the address on the FortiGate only. The host still has Layer 2 access on the switch under those two actions. An email action only notifies and quarantines nothing.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #4
A branch office wiring closet has room for one switch. The switch must power 16 IP cameras at up to 15.4 W each and 6 wireless access points at up to 30 W each, all on separate PoE ports. The PoE budgets of the candidate models are: 124F-POE: 185 W 124F-FPOE: 370 W 148F-POE: 370 W 148F-FPOE: 740 W Which FortiSwitch model should the administrator select?
Correct answer: B
Explanation
The worst-case load is 16 x 15.4 W = 246.4 W for the cameras plus 6 x 30 W = 180 W for the access points, a total of 426.4 W. Only the 740 W budget covers this. The 370 W models look adequate for the cameras alone, but they fall short once the access points are added.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #5
Which FortiSwitch feature filters IP packets on untrusted ports by comparing the source IP address and MAC address with the DHCP snooping binding database?
Correct answer: B
Explanation
IP source guard drops IP traffic whose source address and MAC address do not match a DHCP snooping binding or static entry. Dynamic ARP inspection validates ARP packets, not IP traffic in general. Sticky MAC limits learned source MAC addresses, and storm control limits broadcast, multicast and unknown unicast rates.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #6
An administrator sets the sFlow sampling rate to 1024 on a FortiSwitch port. How does the switch sample traffic on that port?
Correct answer: A
Explanation
sFlow uses statistical packet sampling, so a rate of 1024 means roughly one in 1024 packets is sampled and sent to the collector. The rate is a packet count ratio, not a timer, and the header size captured in each sample is a separate setting.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #7
Refer to the exhibit. Exhibit: Port Native VLAN Allowed VLANs (tagged) STP state port1 10 none forwarding port2 10 none forwarding port3 10 none blocking port4 20 none forwarding port5 20 10 forwarding An untagged frame arrives on port1. Its destination MAC address is not in the MAC address table of the managed FortiSwitch. On which ports does the switch send the frame?
Correct answer: C
Explanation
An unknown unicast frame is flooded within its VLAN, which is VLAN 10 here, on all forwarding ports that are members of that VLAN. That includes port2 (untagged) and port5 (tagged). Port3 is in the blocking state and port4 belongs only to VLAN 20.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #8
An administrator inserts a 1000BASE-SX SFP transceiver into an SFP+ port on a managed FortiSwitch. The remote device is a Gigabit switch with a matching SFP, but the link stays down. The port speed is still at its default value. What should the administrator do?
Correct answer: A
Explanation
An SFP+ port defaults to 10G, so a 1G SFP in it needs the port speed set manually to 1000full to match the far end. LACP and STP edge settings affect aggregation and loop protection, not physical link negotiation, and forcing 10000full keeps the speed mismatch.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #9
An administrator wants IP phones that support LLDP-MED to learn automatically that voice traffic must use VLAN 50 when they connect to managed FortiSwitch ports. What should the administrator configure?
Correct answer: C
Explanation
The LLDP-MED network policy TLV is how a switch advertises the VLAN, priority and DSCP that an endpoint should use for a traffic type such as voice. Location and power TLVs serve other purposes, and discovery only collects information from the endpoints.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #10
A company uses 802.1X port authentication on managed FortiSwitch ports. Printers on these ports have no 802.1X supplicant and do not answer EAP requests. MAC authentication bypass is not used. The printers must still be placed in VLAN 99 when they connect. What should the administrator configure in the 802.1X security policy?
Correct answer: D
Explanation
The guest VLAN is used for endpoints that do not respond to EAP requests, such as devices without a supplicant. The auth-fail VLAN applies to endpoints that respond but fail authentication, which is the tempting but wrong choice here.
Continue with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Discussion
Explain your reasoning, not just the letterOther Fortinet certifications
- NSE4_FGT-7.0: Fortinet NSE 4 - FortiOS 7.0 (opens in a new tab)
- NSE4_FGT-7.2: Fortinet NSE 4 - FortiOS 7.2 (opens in a new tab)
- NSE7_EFW-7.0: Fortinet NSE 7 - Enterprise Firewall 7.0 (opens in a new tab)
- NSE5_FMG-7.2: Fortinet NSE 5 - FortiManager 7.2 (opens in a new tab)
- NSE4-5.4: Fortinet Network Security Expert - FortiOS 5.4 (opens in a new tab)
- NSE5_FAZ-7.0: Fortinet NSE 5 - FortiAnalyzer 7.0 (opens in a new tab)
- NSE7_SDW-7.2: Fortinet NSE 7 - SD-WAN 7.2 (opens in a new tab)
- NSE7_SDW-7.0: Fortinet NSE 7 - SD-WAN 7.0 (opens in a new tab)
- NSE6_FAC-6.4: Fortinet NSE 6 - FortiAuthenticator 6.4 (opens in a new tab)
- NSE7_LED-7.0: Fortinet NSE 7 - LAN Edge 7.0 (opens in a new tab)
- NSE5_FMG-7.0: Fortinet NSE 5 - FortiManager 7.0 (opens in a new tab)
- NSE6_FML-6.2: Fortinet NSE 6 - FortiMail 6.2 (opens in a new tab)
Reviews
Write a review★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit SharmaVerified buyer
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar NyströmVerified buyer
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah SmithVerified buyer
FAQ
Learn More: https://www.fortinet.com/training-certification
- Q1: What is the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam?
- A: NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 is a Fortinet certification exam. Judging by the questions in our bank, it concentrates on fortiswitch, port1, fortigate, fortilink and vlan.
- Q2: What topics does the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam cover?
- A: Questions in our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 bank cluster around fortiswitch, port1, fortigate, fortilink, vlan, ports, quarantine and port. Working through the full set is the quickest way to find which of these you are weakest on.
- Q3: How should I prepare for NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2?
- A: Work through the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice questions here, checking your answer on each one, then sit the practice test to rehearse the exam under timed conditions before the real thing.
- Q4: Are these real NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam questions?
- A: They are drawn from officially released past questions and from community members who have sat NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2. Answers are verified and updated weekly.
- Q5: Where do I register for the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam?
- A: Register through Fortinet directly. Exampractice is not affiliated with Fortinet and does not administer the exam.
- Q6: Is there a free NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 sample?
- A: Yes. Every NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 page shows a free sample of real questions. Upgrading opens the full bank and the practice test.
- Q7: What are Fortinet Certification Exams?
- A: Fortinet Certification Exams validate your expertise in using and managing Fortinet’s network security solutions, including FortiGate firewalls, FortiAnalyzer, and other Fortinet security products. These certifications demonstrate your proficiency in deploying, configuring, and troubleshooting Fortinet security technologies to protect networks from cyber threats.
- Q8: Why should I pursue Fortinet Certification?
- A: Fortinet Certification enhances your professional credibility, showcasing your skills and knowledge in network security. This can lead to better job opportunities, higher salaries, and career advancement in cybersecurity and IT infrastructure roles.
- Q9: What are the benefits of Fortinet Certification?
- A: Benefits include recognition as a certified Fortinet professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest Fortinet technologies and best practices.
- Q10: Who should take Fortinet Certification Exams?
- A: Network engineers, system administrators, security analysts, and IT professionals involved in designing, implementing, and managing network security solutions using Fortinet products should consider these certifications to validate their expertise and advance their careers.
- Q11: What types of Fortinet Certification Exams are available?
- A: Fortinet offers various certification paths under the Network Security Expert (NSE) program, including:
- Q12: How do I prepare for Fortinet Certification Exams?
- A: Preparation can include official Fortinet training courses, study guides, practice exams, online tutorials, and hands-on experience with Fortinet security products and solutions.
- Q13: Where can I take Fortinet Certification Exams?
- A: Fortinet Certification Exams can be taken at authorized Pearson VUE testing centers worldwide or online, providing flexibility to fit your schedule and location.
- Q14: How do Fortinet Certifications impact my career?
- A: Fortinet Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in network security and IT infrastructure.
- Q15: Are there any prerequisites for Fortinet Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior certifications. Check the specific requirements for each certification path on the Fortinet website.
- Q16: How often do I need to recertify for Fortinet Certifications?
- A: Fortinet Certifications typically require recertification every two years to ensure that certified professionals stay updated with the latest cybersecurity technologies and industry practices.



