Free NSE7_SDW-7.0: Fortinet NSE 7 - SD-WAN 7.0 Exam Questions and Answers
65 verified practice questions for NSE7_SDW-7.0.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 19, 2026
- Provider
- Fortinet
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
- Practice format
- Multiple choice
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Refer to the exhibits. Exhibit A shows the packet duplication rule configuration, the SD-WAN zone status output, and the sniffer output on FortiGate acting as the sender. Exhibit B shows the sniffer output on a FortiGate acting as the receiver. The administrator configured packet duplication on both FortiGate devices. The sniffer output on the sender FortiGate shows that FortiGate forwards an ICMP echo request packet over three overlays, but it only receives one reply packet through T_INET_1_0. Based on the output shown in the exhibits, which two reasons can cause the observed behavior? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, D
The sender duplicated the packet across three overlays because duplication-max-num is 3, and the receiver has packet de-duplication enabled, so it discarded the redundant copies and answered only once.
Was this answer correct?Question #2
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
Please select an optionIncorrectCorrect answer: A
SD-WAN 7.2 Study Guide page 321 You can view the stored member metrics by running the diagnose sys sdwan sla-log command. Note that you must include the name of the performance SLA followed by the member configuration index number. To display the SLA logs per interface, you run the diagnose sys sdwan intf- sla-log command.
Was this answer correct?Question #3
In a hub-and-spoke topology, what are two advantages of enabling ADVPN on the IPsec overlays? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, B
ADVPN lets spokes negotiate on-demand shortcut tunnels directly between each other, giving full-mesh connectivity while keeping the simple hub-and-spoke configuration. The hub is still needed to broker the shortcut negotiation.
Was this answer correct?Question #4
What is the route-tag setting in an SD-WAN rule used for?
Please select an optionIncorrectCorrect answer: B
Route tags mark prefixes learned through BGP, and the SD-WAN rule uses the tag to define its destination dynamically from those routes instead of static address objects.
Was this answer correct?Question #5
Refer to the exhibit. Which statement about the role of the ADVPN device in handling traffic is true?
Please select an optionIncorrectCorrect answer: C
The output shows the device receiving a shortcut query from one spoke and relaying it to the other spoke, which is the broker role performed by the ADVPN hub.
Was this answer correct?Question #6
What does enabling the exchange-interface-ip setting enable FortiGate devices to exchange?
Please select an optionIncorrectCorrect answer: C
exchange-interface-ip makes the peers exchange the IP addresses assigned to their IPsec tunnel interfaces, so each side can install a next-hop for routing protocols and shortcuts over the overlay.
Was this answer correct?Question #7
What is a benefit of using application steering in SD-WAN?
Please select an optionIncorrectCorrect answer: B
Application steering matches traffic on the application detected by application control, so the rule can send that specific application over a chosen member instead of relying only on IP or ISDB objects.
Was this answer correct?Question #8
Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, C
SD-WAN rules compare the preferred members against the SLA target to decide whether they still meet requirements, and only the Lowest Cost (SLA) and Maximize Bandwidth (SLA) strategies use SLA targets. Metrics are measured even without a target.
Was this answer correct?Question #9
Which are three key routing principles in SD-WAN? (Choose three.)
Select 3 answers.
Please select an optionIncorrectCorrect answer: B, D, E
Regular policy routes are evaluated before SD-WAN rules; by default a member without a valid route to the destination is skipped, and the rule itself is skipped when the best route does not point to an SD-WAN member.
Was this answer correct?Question #10
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, C
The implicit SD-WAN rule catches sessions only after no policy route or explicit SD-WAN rule matched, and it applies when the routing lookup resolves the destination to the SD-WAN interface.
Was this answer correct?
Continue with NSE7_SDW-7.0: Fortinet NSE 7 - SD-WAN 7.0
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE7_SDW-7.0: Fortinet NSE 7 - SD-WAN 7.0, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other Fortinet certifications
- NSE4-5.4: Fortinet Network Security Expert - FortiOS 5.4 (opens in a new tab)
- NSE4_FGT-7.0: Fortinet NSE 4 - FortiOS 7.0 (opens in a new tab)
- NSE5_FMG-7.2: Fortinet NSE 5 - FortiManager 7.2 (opens in a new tab)
- NSE6_FML-6.2: Fortinet NSE 6 - FortiMail 6.2 (opens in a new tab)
- NSE7 Enterprise Firewall - FortiOS 5.4 (opens in a new tab)
- NSE7_EFW-6.2: Fortinet NSE 7 - Enterprise Firewall 6.2 (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://www.fortinet.com/training-certification
- Q1: What are Fortinet Certification Exams?
- A: Fortinet Certification Exams validate your expertise in using and managing Fortinet’s network security solutions, including FortiGate firewalls, FortiAnalyzer, and other Fortinet security products. These certifications demonstrate your proficiency in deploying, configuring, and troubleshooting Fortinet security technologies to protect networks from cyber threats.
- Q2: Why should I pursue Fortinet Certification?
- A: Fortinet Certification enhances your professional credibility, showcasing your skills and knowledge in network security. This can lead to better job opportunities, higher salaries, and career advancement in cybersecurity and IT infrastructure roles.
- Q3: What are the benefits of Fortinet Certification?
- A: Benefits include recognition as a certified Fortinet professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest Fortinet technologies and best practices.
- Q4: Who should take Fortinet Certification Exams?
- A: Network engineers, system administrators, security analysts, and IT professionals involved in designing, implementing, and managing network security solutions using Fortinet products should consider these certifications to validate their expertise and advance their careers.
- Q5: What types of Fortinet Certification Exams are available?
- A: Fortinet offers various certification paths under the Network Security Expert (NSE) program, including:
- Q6: How do I prepare for Fortinet Certification Exams?
- A: Preparation can include official Fortinet training courses, study guides, practice exams, online tutorials, and hands-on experience with Fortinet security products and solutions.
- Q7: Where can I take Fortinet Certification Exams?
- A: Fortinet Certification Exams can be taken at authorized Pearson VUE testing centers worldwide or online, providing flexibility to fit your schedule and location.
- Q8: How do Fortinet Certifications impact my career?
- A: Fortinet Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in network security and IT infrastructure.
- Q9: Are there any prerequisites for Fortinet Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior certifications. Check the specific requirements for each certification path on the Fortinet website.
- Q10: How often do I need to recertify for Fortinet Certifications?
- A: Fortinet Certifications typically require recertification every two years to ensure that certified professionals stay updated with the latest cybersecurity technologies and industry practices.