Free NSE7_SDW-7.2: Fortinet NSE 7 - SD-WAN 7.2 Exam Questions and Answers
82 verified practice questions for NSE7_SDW-7.2.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 19, 2026
- Provider
- Fortinet
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
- Practice format
- Multiple choice
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Refer to the exhibit. An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0. Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, C
Traffic can leave through another member if a policy route overrides SD-WAN, or if the intended member has no valid route to the destination, so the rule falls to the next member.
Was this answer correct?Question #2
Refer to the exhibits. Exhibit A Exhibit B Exhibit A shows the source NAT (SNAT) global setting and exhibit B shows the routing table on FortiGate. Based on the exhibits, which two actions does FortiGate perform on existing sessions established over port2, if the administrator increases the static route priority on port2 to 20? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, D
The priority change makes FortiGate flag the affected sessions as dirty, and because snat-route-change is enabled it updates the gateway of the SNAT sessions so they now egress through port1.
Was this answer correct?Question #3
Which action fortigate performs on the traffic that is subject to a per-IP traffic shaper of 10 Mbps?
Please select an optionIncorrectCorrect answer: C
A per-IP shaper applies its limit individually, capping each source IP address at 10 Mbps rather than sharing that bandwidth among them.
Was this answer correct?Question #4
Which are two benefits of using CLI templates in FortiManager? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, D
CLI templates let you insert FortiManager meta fields as variables and push advanced CLI settings that the GUI does not expose; they cannot reverse-sync local device changes.
Was this answer correct?Question #5
Which two statements about SD-WAN central management are true? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, D
SD-WAN central management is enabled per ADOM and uses SD-WAN templates to push the configuration to the managed devices.
Was this answer correct?Question #6
What does enabling the exchange-interface-ip setting enable FortiGate devices to exchange?
Please select an optionIncorrectCorrect answer: C
exchange-interface-ip makes the peers exchange the IP addresses assigned to their IPsec tunnel interfaces, so each side can install a next-hop for routing protocols and shortcuts over the overlay.
Was this answer correct?Question #7
What are two benefits of using forward error correction (FEC) in IPsec VPNs? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, C
FEC sends extra parity packets that let the receiver rebuild packets lost in transit, which makes noisy or lossy links usable without retransmission. FEC traffic is not hardware offloaded.
Was this answer correct?Question #8
Refer to the Exhibits: Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members. Based on the exhibits, which statement is correct?
Please select an optionIncorrectCorrect answer: C
Port2 is dead, so its static routes are still shown but the members flagged alive keep their routes active in the routing table.
Was this answer correct?Question #9
Which statement about SD-WAN zones is true?
Please select an optionIncorrectCorrect answer: D
SD-WAN zones are a group of interfaces that share the same SD-WAN settings, such as health check, SLA, and load balancing. Some characteristics of SD- WAN zones are: • An SD-WAN zone can contain different types of interfaces, such as physical, VLAN, aggregate, and tunnel interfaces1. • An SD-WAN zone can contain up to 512 members1. • You can use an SD-WAN zone in static route definitions, as long as the destination interface is also an SD-WAN zone1. • You can configure up to 32 SD-WAN zones per VDOM1.
Was this answer correct?Question #10
Refer to the exhibit. Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, B
Was this answer correct?
Continue with NSE7_SDW-7.2: Fortinet NSE 7 - SD-WAN 7.2
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in NSE7_SDW-7.2: Fortinet NSE 7 - SD-WAN 7.2, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other Fortinet certifications
- NSE4-5.4: Fortinet Network Security Expert - FortiOS 5.4 (opens in a new tab)
- NSE4_FGT-7.0: Fortinet NSE 4 - FortiOS 7.0 (opens in a new tab)
- NSE5_FMG-7.2: Fortinet NSE 5 - FortiManager 7.2 (opens in a new tab)
- NSE6_FML-6.2: Fortinet NSE 6 - FortiMail 6.2 (opens in a new tab)
- NSE7 Enterprise Firewall - FortiOS 5.4 (opens in a new tab)
- NSE7_EFW-6.2: Fortinet NSE 7 - Enterprise Firewall 6.2 (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://www.fortinet.com/training-certification
- Q1: What are Fortinet Certification Exams?
- A: Fortinet Certification Exams validate your expertise in using and managing Fortinet’s network security solutions, including FortiGate firewalls, FortiAnalyzer, and other Fortinet security products. These certifications demonstrate your proficiency in deploying, configuring, and troubleshooting Fortinet security technologies to protect networks from cyber threats.
- Q2: Why should I pursue Fortinet Certification?
- A: Fortinet Certification enhances your professional credibility, showcasing your skills and knowledge in network security. This can lead to better job opportunities, higher salaries, and career advancement in cybersecurity and IT infrastructure roles.
- Q3: What are the benefits of Fortinet Certification?
- A: Benefits include recognition as a certified Fortinet professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest Fortinet technologies and best practices.
- Q4: Who should take Fortinet Certification Exams?
- A: Network engineers, system administrators, security analysts, and IT professionals involved in designing, implementing, and managing network security solutions using Fortinet products should consider these certifications to validate their expertise and advance their careers.
- Q5: What types of Fortinet Certification Exams are available?
- A: Fortinet offers various certification paths under the Network Security Expert (NSE) program, including:
- Q6: How do I prepare for Fortinet Certification Exams?
- A: Preparation can include official Fortinet training courses, study guides, practice exams, online tutorials, and hands-on experience with Fortinet security products and solutions.
- Q7: Where can I take Fortinet Certification Exams?
- A: Fortinet Certification Exams can be taken at authorized Pearson VUE testing centers worldwide or online, providing flexibility to fit your schedule and location.
- Q8: How do Fortinet Certifications impact my career?
- A: Fortinet Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in network security and IT infrastructure.
- Q9: Are there any prerequisites for Fortinet Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior certifications. Check the specific requirements for each certification path on the Fortinet website.
- Q10: How often do I need to recertify for Fortinet Certifications?
- A: Fortinet Certifications typically require recertification every two years to ensure that certified professionals stay updated with the latest cybersecurity technologies and industry practices.