Free JN0-1332: Security Design. Specialist (JNCDS-SEC) Exam Questions and Answers
18 verified practice questions for JN0-1332.
The first 10 questions on this page are free to read, answers included — no account and no card. A plan opens the rest of the bank, the full timed practice test and your weak-topic reporting.
Last updated: September 19, 2026
- Exam code
- JN0-1332
- Provider
- Juniper
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Our test mode duration & pass mark
- 130 mins · 70%
- Verified answers
- Reviewed weekly
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
You are designing a high availability firewall solution. You select an off-path design instead of an inline design. What are two reasons for this decision? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, C
Was this answer correct?Question #2
You are asked to provide a design proposal to secure a service provider's network against IP spoofing. As part of your design, you must ensure that only traffic sourced from the same subnet is allowed on the customer-facing interfaces. Which solution will satisfy this requirement?
Please select an optionIncorrectCorrect answer: B
Strict mode uRPF verifies that the source address is reachable through the receiving interface, which enforces that customer traffic is sourced from the connected subnet.
Was this answer correct?Question #3
As part of a design requirement you are asked to allow users in a specific department to authenticate only on their laptops and no other devices on the same network port. Which mode of 802.1X authentication will you use to satisfy this requirement?
Please select an optionIncorrectCorrect answer: B
In multiple mode every device on the port must authenticate individually, so only the department laptops succeed while other devices are denied.
Was this answer correct?Question #4
Physical security devices are ''blind'' to which type of traffic?
Please select an optionIncorrectCorrect answer: C
Intra-server traffic between VMs stays inside the hypervisor virtual switch, so physical security devices cannot see it. Private VLAN, management and bare-metal-to-VM traffic all cross physical links.
Was this answer correct?Question #5
When designing the security for a service provider core router, you are asked to add a firewall filter on the lo0 interface. In this scenario, which two protocols would you want to allow through the filter? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: B, C
LLDP for neighbour discovery and BGP for routing peering are the control protocols permitted to the core router loopback; STP is not used on a service provider core.
Was this answer correct?Question #6
You are designing a central management solution. Your customer wants a logging solution that will support the collection of up to 10,000 events per second from many SRX Series devices that will be deployed in their network. In this scenario, which solution should you include in your design proposal?
Please select an optionIncorrectCorrect answer: A
Junos Space Log Director is the log collection and reporting application that scales to thousands of events per second from many SRX Series devices.
Was this answer correct?Question #7
According to Juniper Networks, what are two focus points when designing a secure network? (Choose two.)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, D
Juniper's secure network design focuses on classifying traffic and on performance so security controls scale without degrading the network.
Was this answer correct?Question #8
You are designing an IP camera solution for your warehouse You must block command and control servers from communicating with the cameras. In this scenario. which two products would you need to include in your design? (Choose two)
Select 2 answers.
Please select an optionIncorrectCorrect answer: A, C
Was this answer correct?Question #9
You are a security architect for a small managed service provider. The marketing team has proposed providing firewall services to the customers. The requirements for the solution are shown below -- The customer must be able to manage their own security device. -- You must provide segmentation using Layer 2 and Layer 3. -- You need to implement dynamic routing -- You need to provide UTM services in this scenario. which product would you select to provide the firewall services?
Please select an optionIncorrectCorrect answer: B
vSRX provides the full SRX feature set, including transparent and route modes, dynamic routing protocols and UTM services, and each customer can manage its own instance. cSRX does not offer the required UTM services.
Was this answer correct?Question #10
You are asked to deploy a product that will provide east-west protection between virtual machines hosted on the same physical server with a requirement to participate with local routing instances. Which product would you use in this scenario?
Please select an optionIncorrectCorrect answer: D
vSRX is a full-featured virtual firewall that supports routing instances, so it can inspect east-west traffic between virtual machines on the same host.
Was this answer correct?
Continue with JN0-1332: Security Design. Specialist (JNCDS-SEC)
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in JN0-1332: Security Design. Specialist (JNCDS-SEC), the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Other Juniper certifications
- JN0-104: Junos, Associate (JNCIA-Junos) (opens in a new tab)
- JN0-105: Junos, Associate (JNCIA-Junos) (opens in a new tab)
- JN0-363: Service Provider Routing and Switching, Specialist (JNCIS-SP) (opens in a new tab)
- JN0-230: Security, Associate (JNCIA-SEC) (opens in a new tab)
- JN0-351: Enterprise Routing and Switching, Specialist (JNCIS-ENT) (opens in a new tab)
- JN0-231: Security, Associate (JNCIA-SEC) (opens in a new tab)
Reviews
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah Smith
USA
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar Nyström
Sweden
★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit Sharma
India
FAQ
Learn More: https://www.juniper.net/us/en/training/certification.html
- Q1: What are Juniper Certification Exams?
- A: Juniper Certification Exams validate your expertise in using and managing Juniper Networks’ products and solutions, including routing, switching, security, and automation. These certifications demonstrate your proficiency in deploying, configuring, and troubleshooting Juniper technologies to optimize network performance and security.
- Q2: Why should I pursue Juniper Certification?
- A: Juniper Certification enhances your professional credibility, showcasing your skills and knowledge in networking and security. This can lead to better job opportunities, higher salaries, and career advancement in IT, networking, and cybersecurity roles.
- Q3: What are the benefits of Juniper Certification?
- A: Benefits include recognition as a certified Juniper professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest Juniper technologies and best practices.
- Q4: Who should take Juniper Certification Exams?
- A: Network engineers, system administrators, security professionals, and anyone involved in managing and implementing Juniper Networks’ solutions should consider these certifications to validate their expertise and advance their careers.
- Q5: What types of Juniper Certification Exams are available?
- A: Juniper offers various certification paths, including:
- Q6: How do I prepare for Juniper Certification Exams?
- A: Preparation can include official Juniper training courses, study guides, practice exams, online tutorials, and hands-on experience with Juniper products and solutions.
- Q7: Where can I take Juniper Certification Exams?
- A: Juniper Certification Exams can be taken at authorized Pearson VUE testing centers worldwide or online, providing flexibility to fit your schedule and location.
- Q8: How do Juniper Certifications impact my career?
- A: Juniper Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in networking, security, and IT infrastructure.
- Q9: Are there any prerequisites for Juniper Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior experience with Juniper products. Check the specific requirements for each certification path on the Juniper Networks Certification Program (JNCP) website.
- Q10: How often do I need to recertify for Juniper Certifications?
- A: Juniper Certifications typically require recertification every three years to ensure that certified professionals stay updated with the latest networking technologies and industry practices.