HPE6-A73 Aos-cx Practice Questions

An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches. What would cause this problem?

• AA. Local optimization was not enabled on the VSX LAG
• BB. The VSX LAG hash does not match the remote peer
• CC. The VSX LAG interfaces are in layer-3 mode
• DD. LACP was enabled in active mode on the VSX LAG

What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

• AA. Deployment
• BB. Schedule
• CC. Plan
• DD. Agent

What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?

• AA. Only a traffic rate and burst size can be defined for a queue
• BB. Limits can be defined only for broadcast and multicast traffic
• CC. Rate limiting and egress queue shaping can be used to restrict inbound traffic
• DD. Rate limiting and egress queue shaping can be applied globally

When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?

• AA. Syntax validation
• BB. Semantic validation
• CC. Conformance validation
• DD. Change validation

An administrator implements interim accounting for guest users so that ClearPass can track the amount of bandwidth that guests upload and download. Guests that abuse bandwidth consumption should be disconnected from the network. The administrator configures the following on the AOS-CX access switches: After performing this configuration, the administrator notices that guest users that have exceeded the guest bandwidth limit are not being disconnected. Upon further investigation, Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch. What is causing this issue?

• AA. RADIUS change of authorization is not enabled on the AOS-CX switch.
• BB. Bandwidth consumption of the guests is not being reported by the AOS-CX switch.
• CC. NTP is not configured on the AOS-CX switch.
• DD. There is a time discrepancy between the AOS-CX switch and ClearPass.

What is correct regarding the configuration of ACLs on AOS-CX switches?

• AA. Statements with the log keyword are always processed by the switch CPU.
• BB. Standard ACLs are used to match on routes when performing route distribution.
• CC. Wildcard masks are used to match on a range of IP addresses.
• DD. Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.

How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?

• AA. Use the web interface of the NetEdit server
• BB. Use the web interface of the AOS-CX switch
• CC. Use the web interface of Aruba Central
• DD. Use the CLI of the AOS-CX switch