A00-221 Synergy Practice Questions

Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView. What must the customer do before migrating the application?

• AA. Edit the server profile and change server hardware type
• BB. Copy the server profile and assign the clone to the new hardware
• CC. Create a new server profile template and apply to the new hardware
• DD. Migrate the application to a Logical JBOD and connect it to the new server

Your customer has me following HPE Synergy setup - Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure - Two HPE Virtual Connect SE 100Gb F32 Module for Synergy - Four HPE Synergy 50Gb interconnect Link Module - Six HPE Synergy Virtual Connect SE 32Gb FC Modules The customer needs to add a frame. Which statement about the expansion of this setup is true?

• AA. The additional frame cannot have 12Gb SAS connection modules installed
• BB. The additional frame must have HPE Virtual Connect FC modules installed
• CC. The customer can grow the existing logical enclosure up to 5 frames
• DD. The customer has to create a new logical enclosure for the additional frame

Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform. When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available. What must be done to fix this issue?

• AA. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
• BB. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
• CC. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
• DD. Check within the server profile which server hardware is used and perform the Refresh operation on thiscompute node to get the latest adapter information.