Free 212-82: Certified Cybersecurity Technician Exam Questions and Answers
Certified Cybersecurity Technician is exam 212-82, part of EC-Council certification. EC-Council codes run three digits, a hyphen and two more, where the prefix marks the family — 212 for technician level, 312 for the main practitioner range including CEH, 712 for the executive CCISO — and the version is appended to the code rather than changing it. Formats differ sharply: some are four-hour multiple-choice papers, while CPENT is a 24-hour hands-on exam with a written report due within seven days.
Candidates comparing 212-82 exam dumps, ExamTopics and other 212-82 practice tests use this page for the answers and explanations behind each question. Download the free 212-82 PDF, then sit the timed 212-82 exam simulation before booking with ECCouncil.
Last updated: October 7, 2026
- Exam code
- 212-82
- Provider
- ECCouncil
- Questions in our bank
- 1000+
- Free to read
- First 10, with answers
- Official page
- Official Exam website
- Our test mode duration & pass mark
- 130 mins · 70%
Recommended: Switch to Test Mode to start a practice test that simulates the real exam experience.
Question #1
Juan, a safety officer at an organization, installed a physical lock at the entrance of each floor. All employees in the organization were allotted a smart card embedded in their ID cards, which had to be swiped to unlock doors and Access any floor. Which of the following types of physical locks did Juan install In this scenario?
Correct answer: B
Explanation
Digital locks are the types of physical locks that Juan installed in this scenario. A physical lock is a device that prevents or restricts access to a physical location or environment, such as a door, a cabinet, a drawer, etc. A physical lock can have different types based on its mechanism or technology. A digital lock is a type of physical lock that uses electronic or digital components, such as a keypad, a card reader, a fingerprint scanner, etc., to unlock or lock . A digital lock can be used to provide enhanced security and convenience to users, but it can also be vulnerable to hacking or tampering. In the scenario, Juan installed a physical lock at the entrance of each floor. All employees in the organization were allotted a smart card embedded in their ID cards, which had to be swiped to unlock doors and access any floor. This means that he installed digital locks for those doors. A mechanical lock is a type of physical lock that uses mechanical components, such as a key, a bolt, a latch, etc., to unlock or lock. A combination lock is a type of physical lock that uses a sequence of numbers or symbols, such as a dial, a wheel, or a keypad, to unlock or lock. An electromagnetic lock is a type of physical lock that uses an electromagnet and an armature plate to unlock or lock.
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #2
Zayn, a network specialist at an organization, used Wireshark to perform network analysis. He selected a Wireshark menu that provided a summary ol captured packets, IO graphs, and flow graphs. Identify the Wireshark menu selected by Zayn in this scenario.
Correct answer: C
Explanation
Statistics is the Wireshark menu selected by Zayn in this scenario. Statistics is a Wireshark menu that provides a summary of captured packets, IO graphs, and flow graphs. Statistics can be used to analyze various aspects of network traffic, such as protocols, endpoints, conversations, or packet lengths3. References: Wireshark Statistics Menu
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #3
Nancy, a security specialist, was instructed to identify issues related to unexpected shutdown and restarts on a Linux machine. To identify the incident cause, Nancy navigated to a directory on the Linux system and accessed a log file to troubleshoot problems related to improper shutdowns and unplanned restarts. Identify the Linux log file accessed by Nancy in the above scenario.
Correct answer: C
Explanation
/var/log/boot.log is the Linux log file accessed by Nancy in the above scenario. Linux is an open-source operating system that logs various events and activities on the system or network. Linux log files are stored in the /var/log directory, which contains different types of log files for different purposes. /var/log/boot.log is the type of log file that records events related to the booting process of the Linux system, such as loading drivers, services, modules, etc. /var/log/boot.log can help identify issues related to unexpected shutdowns and restarts on a Linux machine . /var/log/secure is the type of log file that records events related to security and authentication, such as logins, logouts, password changes, sudo commands, etc. /var/log/kern.log is the type of log file that records events related to the kernel, such as kernel messages, errors, warnings, etc. /var/log/lighttpd/ is the directory that contains log files related to the lighttpd web server, such as access logs, error logs, etc.
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #4
Richard, a professional hacker, was hired by a marketer to gather sensitive data and information about the offline activities of users from location data. Richard employed a technique to determine the proximity of a user's mobile device to an exact location using CPS features. Using this technique. Richard placed a virtual barrier positioned at a static location to interact with mobile users crossing the barrier, identify the technique employed by Richard in this scenario.
Correct answer: D
Explanation
Geofencing is a technique that uses GPS features to determine the proximity of a user’s mobile device to an exact location. Geofencing can be used to create a virtual barrier positioned at a static location to interact with mobile users crossing the barrier. Geofencing can be used for marketing, security, and tracking purposes2. References: What is Geofencing?
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #5
Martin, a network administrator at an organization, received breaching alerts for an application. He identified that a vulnerability in the application allowed attackers to enter malicious input. Martin evaluated the threat severity and extent of damage that could be caused by this vulnerability. He then escalated the issue to the security management team to determine appropriate mitigation strategies. In which of the following threat-modeling steps did Martin evaluate the severity level of the threat?
Correct answer: C
Explanation
Risk and impact analysis is the threat-modeling step in which Martin evaluated the severity level of the threat in the above scenario. Threat modeling is a process that involves identifying, analyzing, and mitigating threats and risks to a system or network. Threat modeling can be used to improve the security and resilience of a system or network by applying various methods or techniques, such as STRIDE, DREAD, PASTA, etc. Threat modeling consists of various steps or phases that perform different tasks or roles. Risk and impact analysis is a threat-modeling step that involves assessing the likelihood and consequences of threats and risks to a system or network . Risk and impact analysis can be used to evaluate the severity level of threats and risks and prioritize them for mitigation . In the scenario, Martin received breaching alerts for an application. He identified that a vulnerability in the application allowed attackers to enter malicious input. Martin evaluated the threat severity and extent of damage that could be caused by this vulnerability. He then escalated the issue to the security management team to determine appropriate mitigation strategies. This means that he performed risk and impact analysis for this purpose. Identify vulnerabilities is a threat-modeling step that involves finding and documenting the weaknesses or flaws in a system or network that can be exploited by threats or risks . Application overview is a threat- modeling step that involves defining and understanding the scope, architecture, components, and functionality of a system or network . Decompose the application is a threat-modeling step that involves breaking down a system or network into smaller and simpler elements, such as data flows, processes, assets, etc.
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #6
Kayden successfully cracked the final round of interviews at an organization. After a few days, he received his offer letter through an official company email address. The email stated that the selected candidate should respond within a specified time. Kayden accepted the opportunity and provided an e-signature on the offer letter, then replied to the same email address. The company validated the e-signature and added his details to their database. Here, Kayden could not deny the company's message, and the company could not deny Kayden's signature. Which of the following information security elements was described in the above scenario?
Correct answer: B
Explanation
The correct answer is B, as it describes the information security element that was described in the above scenario. Non-repudiation is an information security element that ensures that a party cannot deny sending or receiving a message or performing an action. In the above scenario, non-repudiation was described, as Kayden could not deny company’s message, and company could not deny Kayden’s signature. Option A is incorrect, as it does not describe the information security element that was described in the above scenario. Availability is an information security element that ensures that authorized users can access and use information and resources when needed. In the above scenario, availability was not described, as there was no mention of access or use of information and resources. Option C is incorrect, as it does not describe the information security element that was described in the above scenario. Integrity is an information security element that ensures that information and resources are accurate and complete and have not been modified by unauthorized parties. In the above scenario, integrity was not described, as there was no mention of accuracy or completeness of information and resources. Option D is incorrect, as it does not describe the information security element that was described in the above scenario. Confidentiality is an information security element that ensures that information and resources are protected from unauthorized access and disclosure. In the above scenario, confidentiality was not described, as there was no mention of protection or disclosure of information and resources. References: , Section 3.1
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #7
Miguel, a professional hacker, targeted an organization to gain illegitimate access to its critical information. He identified a flaw in the end-point communication that can disclose the target application's data. Which of the following secure application design principles was not met by the application in the above scenario?
Correct answer: A
Explanation
Exception handling is a secure application design principle that states that the application should handle errors and exceptions gracefully and securely, without exposing sensitive information or compromising the system’s functionality. Exception handling can help prevent attackers from exploiting errors or exceptions to gain access to data or resources or cause denial-of-service attacks. In the scenario, Miguel identified a flaw in the end-point communication that can disclose the target application’s data, which means that the application did not meet the exception handling principle.
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #8
Cassius, a security professional, works for the risk management team in an organization. The team is responsible for performing various activities involved in the risk management process. In this process, Cassius was instructed to select and implement appropriate controls on the identified risks in order to address the risks based on their severity level. Which of the following risk management phases was Cassius instructed to perform in the above scenario?
Correct answer: B
Explanation
Risk treatment is the risk management phase that Cassius was instructed to perform in the above scenario. Risk management is a process that involves identifying, analyzing, evaluating, treating, monitoring, and reviewing risks that can affect an organization’s objectives, assets, or operations. Risk management phases can be summarized as follows: risk identification, risk analysis, risk prioritization, risk treatment, and risk monitoring . Risk identification is the risk management phase that involves identifying and documenting potential sources, causes, events, and impacts of risks. Risk analysis is the risk management phase that involves assessing and quantifying the likelihood and consequences of risks. Risk prioritization is the risk management phase that involves ranking risks based on their severity level and determining which risks need immediate attention or action. Risk treatment is the risk management phase that involves selecting and implementing appropriate controls or strategies to address risks based on their severity level . Risk treatment can include avoiding, transferring, reducing, or accepting risks. Risk monitoring is the risk management phase that involves tracking and reviewing the performance and effectiveness of risk controls or strategies over time.
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #9
Omar, an encryption specialist in an organization, was tasked with protecting low- complexity applications such as RFID tags, sensor-based applications, and other IbT- based applications. For this purpose, he employed an algorithm for all lower-powered devices that used less power and resources without compromising device security. identify the algorithm employed by Omar in this scenario.
Correct answer: C
Explanation
Lightweight cryptography is an algorithm that is designed for low-complexity applications such as RFID tags, sensor-based applications, and other IoT-based applications. Lightweight cryptography uses less power and resources without compromising device security. Lightweight cryptography can be implemented using symmetric-key algorithms, asymmetric-key algorithms, or hash functions1. References: Lightweight Cryptography
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Question #10
Nicolas, a computer science student, decided to create a guest OS on his laptop for different lab operations. He adopted a virtualization approach in which the guest OS will not be aware that it is running in a virtualized environment. The virtual machine manager (VMM) will directly interact with the computer hardware, translate commands to binary instructions, and forward them to the host OS. Which of the following virtualization approaches has Nicolas adopted in the above scenario?
Correct answer: B
Explanation
Hardware-assisted virtualization is a virtualization approach in which the guest OS will not be aware that it is running in a virtualized environment. The virtual machine manager (VMM) will directly interact with the computer hardware, translate commands to binary instructions, and forward them to the host OS. Hardware- assisted virtualization relies on special hardware features in the CPU and chipset to create and manage virtual machines efficiently and securely34. Full virtualization is a virtualization approach in which the guest OS will not be aware that it is running in a virtualized environment, but the VMM will run in software and emulate all the hardware resources for each virtual machine5. Hybrid virtualization is a virtualization approach that combines hardware-assisted and full virtualization techniques to optimize performance and compatibility6. OS-assisted virtualization is a virtualization approach in which the guest OS will be modified to run in a virtualized environment and cooperate with the VMM to access the hardware resources
Continue with 212-82: Certified Cybersecurity Technician
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in 212-82: Certified Cybersecurity Technician, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.
Discussion
Explain your reasoning, not just the letterOther ECCouncil certifications
- 312-49v10: Computer Hacking Forensic Investigator (opens in a new tab)
- 312-50v11: Certified Ethical Hacker v11 Exam (opens in a new tab)
- 312-50v12: Certified Ethical Hacker v12 Exam (opens in a new tab)
- 712-50: EC-Council Certified CISO (opens in a new tab)
- 312-50: CEH Certified Ethical Hacker (312-50v9) (opens in a new tab)
- 312-50v13: Certified Ethical Hacker v13 (opens in a new tab)
- 212-89: EC-Council Certified Incident Handler (opens in a new tab)
- 312-39: Certified SOC Analyst (opens in a new tab)
- 312-49v9: ECCouncil Computer Hacking Forensic Investigator (V9) (opens in a new tab)
- 312-38: Certified Network Defender (opens in a new tab)
- 312-85: Certified Threat Intelligence Analyst (opens in a new tab)
- 412-79v8: EC-Council Certified Security Analyst (opens in a new tab)
Reviews
Write a review★★★★★
Exam Practice is worth every penny. The mock exams are realistic, and the feedback helped me focus on key areas.
Amit SharmaVerified buyer
★★★★★
I highly recommend Exam Practice. The feedback after each test helped me improve significantly, and I passed my exams easily.
Oscar NyströmVerified buyer
★★★★★
This platform is a lifesaver. The practice questions and explanations are so detailed. It’s the best study tool I’ve ever used.
Hannah SmithVerified buyer
FAQ
Learn More: https://cert.eccouncil.org/
- Q1: What is the 212-82: Certified Cybersecurity Technician exam?
- A: 212-82: Certified Cybersecurity Technician is a ECCouncil certification exam. Judging by the questions in our bank, it concentrates on employed, professional, specialist, instructed and grace.
- Q2: What topics does the 212-82: Certified Cybersecurity Technician exam cover?
- A: Questions in our 212-82: Certified Cybersecurity Technician bank cluster around employed, professional, specialist, instructed, grace, navigated, wireshark and kayden. Working through the full set is the quickest way to find which of these you are weakest on.
- Q3: How should I prepare for 212-82: Certified Cybersecurity Technician?
- A: Work through the 212-82: Certified Cybersecurity Technician practice questions here, checking your answer on each one, then sit the practice test to rehearse the exam under timed conditions before the real thing.
- Q4: Are these real 212-82: Certified Cybersecurity Technician exam questions?
- A: They are drawn from officially released past questions and from community members who have sat 212-82: Certified Cybersecurity Technician. Answers are verified and updated weekly.
- Q5: Where do I register for the 212-82: Certified Cybersecurity Technician exam?
- A: Register through ECCouncil directly at https://cert.eccouncil.org/. Exampractice is not affiliated with ECCouncil and does not administer the exam.
- Q6: Is there a free 212-82: Certified Cybersecurity Technician sample?
- A: Yes. Every 212-82: Certified Cybersecurity Technician page shows a free sample of real questions. Upgrading opens the full bank and the practice test.
- Q7: What are EC-Council Certification Exams?
- A: EC-Council Certification Exams validate your expertise in various aspects of cybersecurity, including ethical hacking, network security, and forensic investigation. These certifications demonstrate your proficiency in identifying, preventing, and mitigating cyber threats.
- Q8: Why should I pursue EC-Council Certification?
- A: EC-Council Certification enhances your professional credibility, showcasing your skills and knowledge in cybersecurity. This can lead to better job opportunities, higher salaries, and career advancement in the IT and cybersecurity industries.
- Q9: What are the benefits of EC-Council Certification?
- A: Benefits include recognition as a certified cybersecurity professional, improved job performance, access to exclusive resources, continuing education opportunities, and staying current with the latest cybersecurity trends and best practices.
- Q10: Who should take EC-Council Certification Exams?
- A: IT professionals, security analysts, ethical hackers, network administrators, and anyone involved in protecting and securing information systems should consider these certifications to validate their expertise and advance their careers.
- Q11: What types of EC-Council Certification Exams are available?
- A: EC-Council offers various certification paths, including:
- Q12: How do I prepare for EC-Council Certification Exams?
- A: Preparation can include official EC-Council training courses, study guides, practice exams, online tutorials, and hands-on experience in cybersecurity practices.
- Q13: Where can I take EC-Council Certification Exams?
- A: EC-Council Certification Exams can be taken at authorized Pearson VUE testing centers worldwide or online, providing flexibility to fit your schedule and location.
- Q14: How do EC-Council Certifications impact my career?
- A: EC-Council Certifications significantly boost your career by demonstrating your expertise to employers, making you a more competitive candidate for advanced roles and promotions in cybersecurity and IT.
- Q15: Are there any prerequisites for EC-Council Certification Exams?
- A: Some exams may have prerequisites, such as foundational knowledge or prior certifications. Check the specific requirements for each certification path on the EC-Council website.
- Q16: How often do I need to recertify for EC-Council Certifications?
- A: EC-Council Certifications typically require recertification every three years to ensure that certified professionals stay updated with the latest cybersecurity technologies and industry practices.