3V0-42.20 Architect Practice Questions

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. Which risk is documented by an architect? (Choose the best answer.)

• AA. The security team has a firewall communication matrix documented.
• BB. The team is not trained for NSX-T but have a very strong experience with vSphere.
• CC. Open communication between different application tiers is not allowed.
• DD. Aggregate N-S throughput at any given time should be at least 10G.

An NSX-T Architect is working in a brownfield environment with 4 ESXi hosts. These constraints were documented: new servers cannot be purchased North/South bandwidth must be guaranteed Top-of-Rack switches have additional uplinks Which three recommendations should the architect implement? (Choose three.)

Select 3 answers.

• AA. Remove one of the ESXi hosts and install a bare-metal Edge.
• BB. Use a resource pool for production workloads.
• CC. Use a resource pool to deploy the Edge nodes on.
• DD. Recommend obtaining 2 new physical NICs for the servers.
• EE. Install Edge nodes on a separate cluster.

An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design. Which solution should the architect recommend? (Choose the best answer.)

• AA. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
• BB. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
• CC. 3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
• DD. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: Maximum performance and availability is required between the physical and virtual network. Load Balancing service is required for back-end web servers. NAT is required. Which selection should the architect include in their design? (Choose the best answer.)

• AA. Deploy a Tier-1 gateway and connect it to an Active/Active Tier-0 gateway with ECMP configured.
• BB. Deploy an Active/Active Tier-0 gateway and configure ECMP.
• CC. Deploy an Active/Standby Tier-0 gateway and configure ECMP.
• DD. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: There is a performance based SLA for East ?C West traffic. The business critical applications require prioritization of their traffic. One of the services is a file share and has a high demand for bandwidth. Which selection should the architect include in their design? (Choose the best answer.)

• AA. Review average North/South traffic from the core switches and firewall.
• BB. Include a segment QoS profile and review the impact of utilizing this feature.
• CC. Meet with the organization's application team to get additional information.
• DD. Monitor East-West traffic throughout normal business cycles.

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: There isn't much budget available for a new off shore site. The new site is decentralized and no communication with the main data center is required. The design will need to cater for availability, upgrades, and failure scenarios. N+1 must be maintained at all times. Which three selections should the architect recommend in their design? (Choose three.)

Select 3 answers.

• AA. Separate the hosts physical NICs for VSS and N-VDS.
• BB. Make all pNICs part of N-VDS and VMKs will be migrated.
• CC. Collapse the Management/Edge/Compute cluster.
• DD. Install a minimum 4 ESXi hosts in the site.
• EE. A Shared Edge/Management cluster and one for Compute.
• FF. Install a minimum of 3 ESXi hosts in the site.

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: Any proposed solution must provide low latency. Any proposed solution must provide high throughput. Customer is running stock trading applications. Which two selections should the architect recommend to meet high-performance workload requirements? (Choose two.)

Select 2 answers.

• AA. Leverage ESXi as the compute host.
• BB. Use LACP for all uplink profiles.
• CC. Leverage KVM as the compute host.
• DD. Enable enhanced data path mode on the N-VDS.
• EE. Enable latency sensitivity mode on the N-VDS.