Free D-PE-FN-01: Dell PowerEdge Foundations v2 Exam Questions and Answers

A technician is replacing a faulty PSU in a PowerEdge server with redundant power supplies They intend to remove one PSU to perform the swap What is the recommended procedure to maintain server uptime and power redundancy during this PSU replacement?

• AA. Pull one PSU at a time to retain power redundancy
• BB. Disconnect the server from the main power source before PSU removal
• CC. Remove both PSUs simultaneously to expedite the process
• DD. Shut down the server completely before removing any PSU

A system administrator is setting up a new PowerEdge server and must decide between using an HBA or a PERC card for storage connectivity The primary requirement is highspeed data transfer to network devices, and cost is a significant constraint Which approach should the administrator prioritize for initial setup?

• AA. Select an HBA card for cost-effective, reliable non-RAID I/O operations
• BB. Implement a PERC card to immediately reduce latency and enhance overall storage performance
• CC. Choose a RAID controller due to its inherent ability to manage a greater number of devices efficiently
• DD. Integrate a PERC card to enable future RAID configurations for data redundancy

A software development team must set up a testing environment where they can run multiple operating systems on their existing workstations without altering their primary OS. Which type of hypervisor is suitable for this team, allowing them to access virtualization services through their current operating system, rather than directly on the hardware?

• AA. Deploy a Type 1 hypervisor to bypass the existing OS.
• BB. Implement a bare metal hypervisor for direct hardware access.
• CC. Utilize a hosted hypervisor that works through a host OS.
• DD. Choose Microsoft Hyper-V for its standalone OS capabilities.

What is the primary function of the Silicon Root of Trust in Dell PowerEdge servers?

• AA. To manage virtual machine migrations across clusters
• BB. To provide cryptographic verification of firmware and hardware integrity from the factory
• CC. To optimize cooling efficiency based on workload demands
• DD. To enable automatic failover in high-availability configurations

A network designer is planning for a high-speed network infrastructure requiring 10 Gigabit per second (Gbps) data transfer rates Which Ethernet cable categories are speeded to support a transmission speed of 10 Gbps?

• AA. Cat 5e and Cat 6
• BB. Cat 7 and Cat 8
• CC. Cat 6a and Cat 7
• DD. Cat 6 and Cat 7

Which component within an External Switch configuration helps maintain VM network configurations despite changes to the physical pNIC?

• AA. PVLANs
• BB. pNICs
• CC. vNICs
• DD. vEthernet

A data center technician is troubleshooting a server where multiple hard drives have become unresponsive simultaneously. Which server component failure is MOST likely to cause disconnection of multiple hard drives at once?

• AA. CPU failure
• BB. PERC controller failure
• CC. Individual hard drive failure
• DD. The backplane failure

A company is designing its backup infrastructure and must decide where to store the backed-up data. They are considering both on-site and off-site options. Which storage media are commonly used in backup solutions for storing and archiving backup data?

• AA. Network Attached Storage (NAS)
• BB. Solid state drives (SSDs) and NVMe drives
• CC. SAN arrays
• DD. Random Access Memory (RAM) and CPU cache
• EE. Hard disks

What network security component is typically deployed by an organization to protect an internal Local Area Network (LAN) from unauthorized external access and manage client access to the Internet?

• AA. Implement a Network Interface Card for traffic filtering
• BB. Install a cloud storage gateway for secure data transfer
• CC. Utilize a firewall to control network access and prevent intrusions
• DD. Deploy a Storage Resource Manager for access control

Your team is deploying the latest 17G PowerEdge servers and is intrigued by the new DC- MHS architecture. Which architectural evolution was introduced in 17G PowerEdge servers with the Data Center Modular Hardware System (DC-MHS)?

• AA. Simplification of server hardware to reduce component count
• BB. Elimination of modular design in favor of traditional monolithic boards
• CC. Introduction of proprietary, closed hardware standards
• DD. Adoption of Open Compute Project (OCP) standards for modular hardware