XK0-005 Commands Practice Questions
The free XK0-005: CompTIA Linux questions that deal with commands, with answers and explanations. The full bank and the timed practice test cover every topic the exam asks about.
Question #1
A Linux administrator intends to start using KVM on a Linux server. Which of the following commands will allow the administrator to load the KVM module as well as any related dependencies?
Correct answer: A
Explanation
This command will load the KVM module as well as any related dependencies, such as kvm-intel or kvm-amd, depending on the processor type. The modprobe command is a Linux utility that reads the /etc/modules.conf file and adds or removes modules from the kernel. It also resolves any dependencies between modules, so that they are loaded in the correct order. The other options are incorrect because: * B. insmod kvm This command will only load the KVM module, but not any related dependencies. The insmod command is a low-level Linux utility that inserts a single module into the kernel. It does not resolve any dependencies between modules, so they have to be loaded manually. * C. depmod kvm This command will not load the KVM module at all, but only create a list of module dependencies for modprobe to use. The depmod command is a Linux utility that scans the installed modules and generates a file called modules.dep that contains dependency information for each module. * D. hotplug kvm This command is invalid and does not exist. The hotplug mechanism is a feature of the Linux kernel that allows devices to be added or removed while the system is running. It does not have anything to do with loading modules.
Question #2
A systems administrator wants to back up the directory /data and all its contents to /backup/data on a remote server named remote. Which of the following commands will achieve the desired effect?
Correct answer: C
Explanation
The command that will back up the directory /data and all its contents to /backup/data on a remote server named remote is rsync -a /data remote:/backup/. This command uses the rsync tool, which is a remote and local file synchronization tool. It uses an algorithm to minimize the amount of data copied by only moving the portions of files that have changed. The -a option stands for archive mode, which preserves the permissions, ownership, timestamps, and symbolic links of the files. The /data argument specifies the source directory to be backed up, and the remote:/backup/ argument specifies the destination directory on the remote server. The rsync tool will create a subdirectory named data under /backup/ on the remote server, and copy all the files and subdirectories from /data on the local server. The other options are not correct commands for backing up a directory to a remote server. The scp -p /data remote:/backup/data command will copy the /data directory as a file named data under /backup/ on the remote server, not as a subdirectory with its contents. The -p option preserves the permissions and timestamps of the file, but not the ownership or symbolic links. The ssh -i /remote:/backup/ /data command will try to use /remote:/backup/ as an identity file for SSH authentication, which is not valid. The cp -r /data /remote/backup/ command will try to copy the /data directory to a local directory named /remote/backup/, not to a remote server. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Automating Tasks; rsync(1) - Linux manual page
Question #4
The application team has reported latency issues that are causing the application to crash on the Linux server. The Linux administrator starts troubleshooting and receives the following output: Which of the following commands will improve the latency issue?
Correct answer: D
Explanation
The best command to use to improve the latency issue is D. # echo ‘net.core.rmem max = 12500000’ >> /etc/sysctl.conf # echo ‘net.core.wmem_max = 12500000’ >> /etc/sysctl.conf # sysctl -p. This command will increase the size of the receive and send buffers for the network interface, which can improve the network performance and reduce packet loss. The sysctl command will apply the changes to the kernel parameters without rebooting the system. The other commands are either incorrect or not suitable for this task. For example: • A. # echo ‘net.core.net_backlog = 5000000’ >> /etc/sysctl.conf # sysctl -p # systemctl daemon-reload will try to increase the backlog queue for incoming connections, but this is not relevant for the latency issue. The systemctl daemon- reload command is also unnecessary, as it only reloads the systemd configuration files, not the kernel parameters. • B. # ifdown eth0 # ip link set dev eth0 mtu 800 # ifup eth0 will try to change the maximum transmission unit (MTU) of the network interface to 800 bytes, but this is too low and may cause fragmentation and performance degradation. The default MTU for Ethernet is 1500 bytes, and it should not be changed unless there is a specific reason. • C. # systemctl stop network # ethtool -g eth0 512 # systemctl start network will try to change the ring buffer size of the network interface to 512, but this is too small and may cause packet drops and latency spikes. The default ring buffer size for Ethernet is usually 4096 or higher, and it should be increased if there is a high network traffic.
Question #5
A Linux administrator is troubleshooting a memory-related issue. Based on the output of the commands: Which of the following commands would address the issue?
Correct answer: B
Explanation
The command that would address the memory-related issue is kill -9 8321. This command will send a SIGKILL signal to the process with the PID 8321, which is the mysqld process that is using 99.7% of the available memory according to the top output. The SIGKILL signal will terminate the process immediately and free up the memory it was using. However, this command should be used with caution as it may cause data loss or corruption if the process was performing some critical operations. The other options are not correct commands for addressing the memory-related issue. The top -p 8321 command will only display information about the process with the PID 8321, but will not kill it or reduce its memory usage. The renice -10 8321 command will change the priority (niceness) of the process with the PID 8321 to -10, which means it will have a higher scheduling priority, but this will not affect its memory consumption. The free 8321 command is invalid because free does not take a PID as an argument; free only displays information about the total, used, and free memory in the system. References: How to troubleshoot Linux server memory issues; kill(1) - Linux manual page
Question #8
A user generated a pair of private-public keys on a workstation. Which of the following commands will allow the user to upload the public key to a remote server and enable passwordless login?
Correct answer: D
Explanation
The command ssh-copy-id user@server will allow the user to upload the public key to a remote server and enable passwordless login. The ssh-copy-id command is a tool for copying the public key to a remote server and appending it to the authorized_keys file, which is used for public key authentication. The command will also set the appropriate permissions on the remote server to ensure the security of the key. The command ssh-copy-id user@server will copy the public key of the user to the server and allow the user to log in without a password. This is the correct command to use for this task. The other options are incorrect because they either do not copy the public key (scp, rsync, or ssh-add) or do not use the correct syntax (scp ~/.ssh/id_rsa user@server:~/ instead of scp ~/.ssh/id_rsa.pub user@server:~/ or rsync ~ /.ssh/ user@server:~/ instead of rsync ~/.ssh/id_rsa.pub user@server:~/). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Managing Network Services, page 410.
Question #10
A systems administrator wants to be sure the sudo rules just added to /etc/sudoers are valid. Which of the following commands can be used for this task?
Correct answer: A
Explanation
The command visudo -c can be used to check the validity of the sudo rules in the /etc/sudoers file. The visudo command is a tool for editing and validating the /etc/sudoers file, which defines the rules for the sudo command. The -c option checks the syntax and logic of the file and reports any errors or warnings. The command visudo - c will verify the sudo rules and help the administrator avoid any mistakes. This is the correct command to use for this task. The other options are incorrect because they either do not check the validity of the file (test, sudo, or cat) or do not exist (sudo vi check). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 546.
Continue with XK0-005: CompTIA Linux
Unlock the full question bank
You have read the first 10 questions. A subscription opens every question in XK0-005: CompTIA Linux, the full timed practice test, and your progress and weak-topic reporting.
Single exam
$19.99for 30 days
Full question bank and practice test for one exam, for 30 days.
Single exam
$49.99for 1 year
One exam for a full year. Nothing renews and nothing to cancel.
Full access
$39.99/mo
Every exam in the catalogue, month to month.
Full access
$199.99/yr
Every exam in the catalogue for a year.
Already subscribed? Sign in to pick up where you left off.